Home About Us Services News Training Projects Contact Us
Background Grouped Image

Trenching and Excavation Soil Testing

Let’s look at the three main types of soil tests.

The plasticity test, which is sometimes called the pencil test, is used to determine if the soil is cohesive.
This test is performed by rolling a moist soil sample into a thread that’s one-eighth of an inch thick and
two inches long, resembling a short, slim pencil. If the sample can be held at one end without breaking, it
is cohesive.

The thumb penetration test is used to quickly estimate the compressive strength of a cohesive soil
sample. To perform the thumb penetration test, simply press the end of your thumb into a fresh clump of
soil. If the soil sample is Type A, your thumb will only make an indentation in the soil with great effort,
as you can see demonstrated here. If the soil sample is Type B, your thumb will sink into the soil up to the
end of your thumbnail, just like this. If the soil sample is Type C, your thumb will sink all the way into
the soil clump, as you can see here. Your results for this test will probably be somewhere in between
these results.

For a more numeric measurement, the pocket penetrometer test can be used. A soil’s compressive
strength can be given a numeric value by using the pocket penetrometer test. There can be some
variability in these results, so it’s a good idea to run this test on a few soil samples from the same part of
the excavation, just to make sure your results are consistent. A pocket penetrometer works much like a
tire pressure gauge. A thin, metal piston is pushed into a soil sample, and the penetrometer records the
compressive strength of the soil. Be sure that the scale indicator is inserted into the penetrometer body
until only the “zero” mark is showing. To conduct the test, push the piston into the soil until it reaches the
engraved line. Then, simply take the reading from the scale indicator. It’s important to recognize that a
penetrometer may give false results if the soil contains rocks or pebbles, which won’t compress.

As you can see, Type A soil will measure at least 1.5 tons per square foot. Be aware, however, that you
can’t classify a soil as Type A if the excavation site didn’t meet all the conditions of the visual test: if it is
granular, near a source of vibration, or there are signs of previously disturbed soil, water seepage, or
fissured soil. For Type B Soil, the reading will be between 0.5 and 1.5 tons per square foot. Type C soils
are equal to or less than 0.5 tons per square foot.

Determining the type of soil on a site will help a competent person decide which methods of sloping,
benching, or shoring are needed to prevent cave-ins and keep workers safe.

Safe T Pros is Here to Help
Contact your Safe T Pros professional on the job site he or she can help. Contact the office if you do not
have a safe T Pros professional on site.
241 S. Washington St. • Chandler, AZ 85225
800.502.9481 • info@safetpros.com

Similar Articles

Do you have your OSHA 500 Certification?

Do you have your OSHA 500 Certification?

We want to talk to you!

Safe T Pros needs EHS Consultants needed in the following locations:

-N. California

View Article

Dust Masks Voluntary Use

Many job sites have the white dust masks with elastic straps available for use by employees. Are

you doing your part to train in compliance with the OSHA standards?

The general Industry respirator standard 29 CFR 1910.134...

View Article

Earthquake Preparedness and Response

The primary dangers to workers result from: being struck by structural components or furnishings, inadequately secured stored materials, burns resulting from building fires resulting from gas leaks or electrical shorts, or exposure to chemicals...

View Article